The KACON KXL-717 is a yoke roller lever limit switch in the KXL basic series. Its forked lever carries a roller on each arm, so passing machine parts and cams engage the actuator positively in conveyor, packaging and materials-handling positions where a single roller lever cannot be used. The KXL-717 is one of four yoke roller lever variants in the series (KXL-717, KXL-727, KXL-737, KXL-747).
The switch body is shared with the whole KXL range: an aluminium die-cast housing sealed to IP67, a high-capacity built-in switch with silver alloy contacts rated 12A at 250VAC, SUS304 stainless steel springs, and precise actuation angles for repeatable position detection.
| Contact Form | 1N/O + 1N/C |
| Contact Material | Ag alloy |
| Rated Current | 12A 250VAC · Resistance load |
| Insulation Resistance | Min. 100MΩ 500VDC Insulation resistance |
| Contact Resistance | Max. 15mΩ |
| Surge Current | NC Contacts Max 30A / NO Contacts Max 20A |
| Internal Voltage Between Terminals | 1,000VAC 50/60Hz 1 Minute |
| Internal Voltage (Terminal to Non-Charging Parts) | 2,200VAC 50/60Hz 1 Minute |
| Mechanical Life | Min. 10,000,000 |
| Electrical Life | Min. 1,000,000 |
| Vibration Resistance | 10 ~ 55Hz Dual wave length 1.5mm |
| Degree of Protection | IP67 |
| Ambient Temperature | -10 ~ +80°C (with no icing) |
| Ambient Humidity | Max. 95%RH |
The KXL series carries CE, CCC, cURus and KC certification. Options include LED (suffix D, 12–24VDC/AC) or neon (suffix A, 100–240VAC) indicator lamps and stainless steel / copper execution (suffix S). Contact our team for selection help, datasheets and quotations.
