The KTC-E series is a dual purpose temperature controller that integrates normally closed and normally open contacts in a single unit. The NC contact (red dial, terminals 11-12) regulates a heater; the NO contact (blue dial, terminals 23-24) regulates a filter fan or switches a signal device. The two circuits are set and controlled independently with two dials.
Normally closed and normally open contacts integrated in one unit
Stable independent control of heating and cooling
Easy to operate, DIN-rail mounting
Insulating plastic casing to UL94 V-0, light grey, IP20
Long service life > 100,000 cycles
| Model | Temperature range |
|---|---|
| KTC-E50 | -10 to +50°C |
| KTC-E60 | 0 to +60°C |
| KTC-E80 | +20 to +80°C |
| KTC-E120 | +14 to +122°F |
| KTC-E140 | +32 to +140°F |
| Parameter | Value |
|---|---|
| Switch temperature difference | 7K (±4K tolerance) |
| Sensor element | thermostatic bimetal |
| Contact type | snap-action contact |
| Contact resistance | <10mΩ |
| Service life | >100,000 cycles |
| Max. switching capacity | 250VAC, 10(2)A / 120VAC, 15(2)A / DC 30W |
| EMC | acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3 |
| Connection | 4-pole terminal, clamping torque 0.5Nm max., rigid wire 2.5mm², stranded wire (with wire end ferrule) 1.5mm² |
| Mounting | clip for 35mm DIN rail EN 60715 |
| Casing | plastic according to UL94 V-0, light grey |
| Dimensions | 67 x 50 x 46 mm |
| Weight | approx. 90g |
| Operating temperature | -20 to +80°C (-4 to +176°F) |
| Storage temperature | -45 to +80°C (-49 to +176°F) |
| Protection type | IP20 |
Enclosures and distribution boxes, ATMs, barrier gates and vending machines — anywhere a heater and a fan must both be controlled in one cabinet.
For model selection and OEM enquiries, please contact us via the contact page.
